Re: 2MA and RD350 problem

[HENATZR]

HOLA, TENGO UN CONTROLADOR YPVS DE RD 350 NECESITO CONECTARLO AL TZR 250 2MA, YA ARME EL CIRCUITO QUE PIBLICA MARTIN 77, A QUE CABLE DEBO CONECTARLO PARA QUE CONVIERTA LA SEÑAL.

Gracias desde CHaco argentina

[Warwick]

HOLA, TENGO UN CONTROLADOR YPVS DE RD 350 NECESITO CONECTARLO AL TZR 250 2MA, YA ARME EL CIRCUITO QUE PIBLICA MARTIN 77, A QUE CABLE DEBO CONECTARLO PARA QUE CONVIERTA LA SEÑAL.

Gracias desde CHaco argentina

Rough English Translation:

HELLO, I HAVE A DRIVER OF RD350YPVS need to connect to TZR 250 2MA, AND TO THE TRACK TO ASSEMBLE PIBLICA MARTIN 77, A CABLE THAT I HAVE YOUR POWER TO MAKE THE SIGNAL.

Thanks from Chaco Argentina

[TZR-V4]

Hi,

I think that RD350 YPVS Box can be used on the 2MA without signal converter.
(Pienso que el controlador del RD350 se puede utilizar sobre el 2MA sin convertir la señal)
Signals on the 2MA are by connector (señales sobre el 2MA son):
 -> +12V
 -> GND (0V)

 -> +5V for position potentiometer power supply
 -> GND for potentiometer
 -> Motor 1 (0V or 12V with respect to rotation)
 -> Motor 2 (0V or 12V with respect to rotation)

 -> RPM signal (negative pulses 0 -> -200V)

 -> 0V -> 5V for position potentiometer return signal

Olivier.

[Stroker]

Yip you are correct you can use a 2ma ypvs controller box with out any mods and signal converters