Author Topic: TZR Rear Suspension Linkage Bush  (Read 249 times)

0 Members and 1 Guest are viewing this topic.

Offline twosmokeforever

  • Snr. Member
  • **
  • Posts: 38
TZR Rear Suspension Linkage Bush
« on: September 03, 2010, 02:24:39 AM »
Hi Guys,
I have been searching for the bush that goes in the rear suspension linkage of the 2ma, item 24 on the fiche page below
This is discontinued and no one seems to have any stock, does anyone have some hanging around, they would like to sell or my other option is to have some made up and will it be worth making up some extra sets?


Offline Yatsushiro

  • Snr. Member
  • **
  • Posts: 171
  • Round The Outside...
Re: TZR Rear Suspension Linkage Bush
« Reply #1 on: September 03, 2010, 04:51:35 PM »
Chris

As per a similar thread on the TDR forum, I'm pretty sure you could find a suitable bush amongst these (It seems that Yamaha used 'off the shelf' sizes):

http://www.ondrives.com/bearings-bushings.html

I use them for the TDR linkage (and the gear lever bush that goes in the crankcase)
Oddball Ex Racer

Offline twosmokeforever

  • Snr. Member
  • **
  • Posts: 38
Re: TZR Rear Suspension Linkage Bush
« Reply #2 on: September 03, 2010, 09:17:06 PM »
Thanks Paul, got some ordered